Between drill programs and rotating crews, silica paperwork often slides down the list until an inspection brings it back. It is a lot to stay on top of.
A comprehensive silica compliance checklist for mining and exploration sites in NSW covers five areas: approved training for exposed workers, fit testing for tight-fitting respirators, higher-order dust controls set out in your plan, air monitoring with exceedance reporting, and worker records kept on file.
Reviewing each area regularly may help your site stay ready for a Resources Regulator visit.
At Munro Respiratory Services, we help NSW mining and exploration teams knock out two of the biggest compliance hurdles at once through expert, on-site Silica Awareness Training and fit testing.
Silica Compliance in Mining: The Checklist
Silica Awareness Training in NSW for Mining Crews
Respirator Fit Testing Checks for Mine Sites
Dust Controls and Your Airborne Contaminants Plan
Air Monitoring and Exposure Reporting at Mines
Silica Worker Records to Keep on File
Answering Your Questions About Mining Compliance
Keeping Your Mine Site Silica Checklist Up to Date
Key Points
|
Silica Compliance in Mining: The Checklist
Silica compliance in mining means showing that workers exposed to respirable crystalline silica are trained, protected and monitored. These silica requirements apply to all mines and petroleum sites in NSW.
| Area | What to Check |
| Training | Every exposed worker holds accredited or Regulator-approved silica training |
| Fit testing | Tight-fitting respirator wearers are fit-tested and clean-shaven |
| Risk Controls | Higher-order controls are in place and documented in your plan |
| Air monitoring | Monitoring is current, and exceedances are reported on time |
| Records | Training and fit test records are complete and easy to find |
Silica Awareness Training in NSW for Mining Crews
Silica Awareness Training in NSW teaches workers how silica dust forms, how it affects health and how to use site controls. Training must be accredited or approved by the Regulator, and SafeWork NSW-approved worker silica training is accepted where relevant.
Training checklist:
- â–¡All roles exposed to silica dust are identified, including drillers, field assistants and contractors
- â–¡New starters complete training before high-risk tasks
- â–¡Certificates or records are filed centrally
Munro Respiratory delivers Silica Awareness Training for NSW mining and exploration teams on-site or remotely, and provides training records on completion.
Respirator Fit Testing Checks for Mine Sites
Fit testing confirms a tight-fitting respirator seals to a worker’s face. Workers must be clean-shaven and fit tested whenever tight-fitting respiratory protection is used. SafeWork NSW requires fit testing at least annually.
Fit testing checklist:
- â–¡Each wearer has a current fit test for their respirator model and size
- â–¡Retests are booked when a worker changes respirator
- â–¡Clean-shaven rules are briefed at pre-starts
Munro Respiratory provides on-site mask fit testing across NSW for P2/N95, half-face and full-face respirators, with automated reminders when the next test is due.
Dust Controls and Your Airborne Contaminants Plan
Dust controls reduce how much silica reaches workers before a respirator is needed. Mines need an airborne contaminants principal hazard management plan, and RPE should only be relied on once higher-order controls are in place.
Higher Order Control Checks
Higher order controls reduce dust at the source, before it reaches a worker’s breathing zone. Common examples on mine sites include water sprays and enclosed cabins.
- â–¡Plan is current, readily understandable and accessible to all workers
- â–¡Engineering controls are maintained and checked
- â–¡RPE requirements are defined in the plan
Air Monitoring and Exposure Reporting at Mines
Air monitoring measures the respirable silica workers breathe during a shift. According to NSW Resources, you must notify the Regulator of exceedances of the exposure standard within 7 days. Results also must not be adjusted for respirator use.
Monitoring checklist:
- â–¡Monitoring covers high-dust tasks and locations
- â–¡Exceedances are investigated and reported within 7 days
- â–¡Controls are reviewed after any exceedance
Silica Worker Records to Keep on File
Records prove that training, testing and monitoring happened. According to SafeWork NSW, keep silica training records while a worker carries out high-risk processing and for five years after they leave.
Records checklist:
- â–¡Training certificates for every exposed worker
- â–¡Fit test certificates with next due dates
- â–¡Monitoring reports and exceedance notifications
Answering Your Questions About Mining Compliance
Do exploration sites follow the same silica rules as mines?
The Resources Regulator’s silica requirements apply to all mines and petroleum sites. Whether a particular exploration activity falls within that scope may depend on how the site is classified, so confirming with the Regulator may help.
What respirator options exist for workers who are not able to shave?
Continuous flow loose-fitting PAPRs generally do not require clean shaving or fit testing. They are recommended where facial hair is not able to be removed for cultural, religious or medical reasons.
Do tier 3 quarries need a separate silica risk control plan?
Not always. Tier 3 quarry operators are considered compliant if existing systems and procedures already cover the plan requirements.
Who carries out airborne dust monitoring at a mine?
Certain airborne dust monitoring must be carried out by a person licensed by the Resources Regulator, and an occupational hygienist should be engaged.
What happens after a silica exceedance is reported?
The Regulator logs exceedances in its exceedance database. The response escalates with the number, frequency and level of exceedances, and may include a desktop review or site inspection.
Keeping Your Mine Site Silica Checklist Up to Date
Silica compliance on a busy mine or exploration site is ongoing work. Running through this checklist on a set schedule helps you catch compliance gaps long before they turn into regulator findings.
Backed by deep roots in the NSW mining and exploration sector through Munro Geological Services, Munro Respiratory Services understands the real-world operational pressures local sites face.
Our team delivers practical, on-site Silica Awareness Training and mask fit testing across NSW, keeping your crew protected and your site inspection-ready.
This article offers general information only and should not be relied upon as professional, technical, or regulatory advice. Requirements and best practice vary. Please consult a suitably qualified professional before acting on any information provided here.
